Skip to main content Skip to first level navigation
Skip to main content First level navigation Menu
Contact Us About Us ricoh.com
Breadcrumbs
Facebook (Open link in new window) YouTube (Open link in new window) LinkedIn (Open link in new window)
Main content
Main content

R5601 Series

3-Cell to 5-Cell Li-ion Battery Management Analog Front-End IC

  • Consumer
  • PLP
  • RoHS

The R5601 is a battery management IC designed for use with a microcontroller and features and analog front-end with overcurrent protection for multi-cell Li-ion/ Li-polymer battery packs. The R5601 supports battery packs consisting of up to 5 cells in series. The R5601 provides a cell selection switch, a decoder that selects the cell to be monitored based on input signals from external devices, an amplifier that outputs the monitored battery voltage, an additional amplifier that monitors charge and discharge currents based on the voltage at both ends of external resistors and then converts the current values to voltage and outputs the voltage values, a low-current voltage regulator that provides voltage to the MCU, a thermal shutdown circuit, an alert output pin that notifies external devices of any errors, and various logic circuits. The R5601 is offered in a 16-pin TSSOP-16 package.

Specs & Datasheets

  Consumer
Maximum Rating 32 V
Number of Cells 3 to 5
Supply Current Normal Mode: Typ. 36 µA
Low Consumption Mode: Typ. 6.5 µA (Only when VR and wake-up function are operating)
Standby Current Max. 2.0 µA
Voltage Monitor Gain: 0.6, Input-referred Voltage Error: ±9 mV (Output-referred Voltage Error: ±5.4 mV)
Current Monitor R5601TxxxAA Gain: 10 ±1.0%, 40 ±2.0%
R5601TxxxAC Gain: 5 ±0.8%, 10 ±1.0%
External Reference Voltage Output 3.0000 V ±3.5 mV
Temperature Characteristics: ±30 ppm/°C (0°C ≤ Ta ≤ 50°C, Ta ≈ Tj)
Voltage Regulator Output Voltage 3.3 V, Output Current Limit: Min. 30 mA
Voltage Regulator Output Voltage Accuracy 1.5% (−20°C ≤ Ta ≤ 60°°C)
Communication Using an I2C interface allows to control the IC with MCU
Package TSSOP-16
Thermal Shutdown can be enabled or disabled by using I2C interface
Built-in FET Swaitch FET Switch can be set with MCU using I2C interface
Alert Output provides a notification to MCU when detecting an event

Download Datasheet

Technical Documents

Application Information

Application Information

Quality & Packages

Product Name Compatibility Package Marking Reliability
R5601Txxxxx-E2-FE
  • gradeConsumerC
  • plpP
TSSOP-16 R5601T R5601T-FE

Refer to the datasheets for the details on the product.
The package file includes package dimensions, taping specifications, taping reels dimensions, power dissipations, and recommended land pattern.
Please contact us or our distributors for unpublished reliability information.

Sample / Buy

Functional Description

Search for similar products under conditions below.