Skip to main content Skip to first level navigation
Skip to main content First level navigation Menu
Contact Us About Us ricoh.com
Main content

RC5T619
POWER MANAGEMENT SYSTEM DEVICE

This IC is the power management IC for GPS-PND/MID and Smart-Phone.
It integrates five high-efficiency step-down DCDC Converters, twelve low dropout regulators, power control logic, Li-ion Battery Charger, I2C-Bus Interface, voltage detections, thermal shut-down, and etc.

Datasheet

Layout Guide

Features

System

  • I2C-Bus interface @3.4MHz and 400kHz
  • Detector Function (System/IO/Battery-Voltage-detector, UVLO)
  • Thermal Shutdown Function
  • Watchdog timer
  • Power on key input for System's power up
  • Power on reset output for CPU
  • Flexible power-on/off sequence by OTP
  • Flexible DCDCx and LDOx default-on/off control by OTP

High Efficiency Step-down DC/DC Converters

  • DCDC1-3 0.6V-3.5V Max 3000mA
  • DCDC4-5 0.6V-3.5V Max 2000mA
  • Soft-start circuit

Low Drop Voltage Regulators

  • LDO1-4 with ECO 0.9V-3.5V Max 300mA
  • LDO5-6 with ECO 0.6V-3.5V Max 300mA
  • LDO7-10 0.9V-3.5V Max 200mA
  • LDORTC1 1.7-3.5V Max 10mA (AlwaysOn, For coin battery)
  • LDORTC2 0.9-3.5V Max 10mA (AlwaysOn)
  • Over current Protection and Short circuit Protection

Li-ion Battery Charger

  • Supports AC adapter charging and USB charging in an individual port.
  • With the current limit protection and charge current control.
  • The system can power on even when Li-ion Battery is low voltage or open.
  • Rapid timer and Trickle timer.
  • Power-path control.
  • Over temperature protection

USB External device interface

Fuel Gauge

  • 12-bit resolution.
  • 1 second integration.

ADC

  • 12-bit resolution A/D converter
  • Eight channels: LIMMON, VADP, VUSB, VBAT, VSYS, THERMBAT and two
  • external(GPIO) pins.
  • Single/Auto conversion mode
  • Detect high/low thresholds which can be set

5ch-GPIO

  • Supports interrupt function (level/edge) for input signals
  • Outputs power-on signal for external devices
  • Power on/off input for System’s power up/down
  • DCDCx and LDOx can be controlled by external input
  • GPIO2 can output LDORTC2
  • GPIO0 and GPIO1 have input to ADC for voltage monitor
  • GPIO0 and GPIO1 have maximum 15mA sink for LED.

Real-Time Clock (RTC)

  • Alarm function
  • Backup current 2.0μA (typ)

Interrupt Controller (INTC)

Package

  • CSP0606-85(0.5mm pitch) or CSP0608-80(0.65mm pitch)

Process

  • CMOS

Applications

  • Portable Device (Tablet, Smart Phone, MID, GPS-PND etc.)
  • Information Appliance (STB, HDMI-Dongle etc.)

Contact

Purchase, Request for Samples and Documents

Distributors

Available from 1 piece!

Buy Online

Contact Us by Mail

Contact Us by Mail

Contact Form (SSL Form)

Contact Us by Phone

Contact Us by Phone

Contact Phone Number