The RN5U700 is an USB Power Delivery controller IC that supports the USB Type-C Connector Specification with having a stand-alone mode to provide automated power-negotiation.
This device has an extensibility to various applications, including Alternate Mode supported by connecting with EC (Embedded Controller).

KEY BENEFITS
KEY SPECIFICATIONS
TYPICAL APPLICATIONS
PIN DESCRIPTIONS
APPLICATIONS

Document download

Sample online

Contact

KEY BENEFITS

The firmware's load is minimized by the stand-alone function such as power negotiation with no microprocessor, etc.
External components can be minimized since built-in OVP, high-voltage LDO, VCONN switch and discharger, etc.
Achievement of Low Consumption Current- Typ. 2.8 µA (Deep-Sleep in Standby), Typ. 1.6 mA (in Operating)

KEY SPECIFICATIONS

USB Power Delivery Specification Rev.3.0 Compliant
USB Type-C Specification Rev.1.2 Compliant
USB Type-C Port Controller (TCPC) Interface Specification Rev.1.0 Compliant
Power Role: DRP / Source / Sink
Data Role: DRD / DFP / UFP
VBUS Controls: Nch.FET, Pch.FET, Switch IC

Protector: VBUS Over Voltage Protection (OVP) / Over Current Protection (OCP), CC Pin OVP, Over Temperature Protection (OTP)
Supports Dead Battery operation
I²C Interface: Up to 1MHz (Fm+)
VBUS Input Voltage: 4.5 V to 24 V
CC1/2 Pin Input Voltage: Up to 24 V
Operating Temperature: -20°C to 85°C

TYPICAL APPLICATIONS FOR POWER RECEIVING

PIN DESCRIPTIONS

QFN0404-24-P12

4.0 mm × 4.0 mm

1	DSLP
2	VIN5
3	CC1
4	CC2
5	VDDIO
6	POLARITY
7	GPIO0
8	GPIO1

9	GPIO2
10	GPIO3
11	SCL
12	SDA
13	FET0D
14	FET0S
15	FET0G
16	FET1D

17	FET1S
18	FET1G
19	FET2
20	IMON
21	VMON
22	REG3
23	VDD3
24	GND

*) The tab on the bottom of the package must be electrically connected to GND (substrate level) when mounted on the board.

APPLICATIONS

Digital Camera, Powerbanks / UPS, Game Machine, Audio Player, Scanner, USB HDD, Power Tool, POS, Security Cameras, Monitoring Camera, Camcorder, Action Cameras, Drive Recorder, etc.